Using the Photo (JPEG) List
You can play back the JPEG files saved on a memory device in various ways.
1After switching the mode to WISELINK, select the memory device that you have inserted. (Refer to page 63)
2Press the ◄ or ► button to select Photo, then press the ENTER button. JPEG files and existing folders are displayed.
3Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button.
➢Pressing the button over a photo icon displays the currently selected photo in full screen. However, JPEG files smaller than 640x480 pixels are zoomed- in at 4 times their original size. (e.g. If a photo’s original size is 200x200 pixels, it is displayed at 800x800 pixels.)
➢size.Press the INFO button and select View to view a photo image at its original
➢folder.Pressing the button over a folder icon shows the JPEG files included in the
➢While a full screen is displayed, ◄ or ► buttons will let you see another photo image in the same folder.
➢Show.Press the PLAY/PAUSE button when a Photo icon is selected to start a Slide
To exit WISELINK mode, press the WISELINK button on the remote control.
➢Moving to a photo may take a few seconds because the file needs to be loaded. At this point, the icon will appear.
➢This menu shows only the files whose extension is jpeg (or jpg). Files with other formats such as gif or tiff will not be displayed.
➢Fifteen thumbnail photos are displayed per page.
➢The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
➢Folders are displayed first and they are followed by all JPEG files in the current folder. The folders and JPEG files are sorted in alphabetical order.
➢If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen. (Refer to pages 68~69)
➢It takes a while to show JPEG files as thumbnail images.
➢WISELINK for this product supports JPEG files up to 8K x 8K pixels. For progressive JPEG files or files whose size exceeds 8MB, the photo will be displayed as a thumbnail only. When trying to view a progressive JPEG file, the message Not supported mode will appear. When trying to view a file exceeding 8MB, the message This file is too large to decode will appear.
➢The higher the image resolution advances, the longer the display time takes.
➢You cannot decode images beyond a horizontal resolution of 5000.
➢You cannot decode images beyond a vertical resolution of 4000.
Press the WISELINK button on the remote control to turn on the WISELINK mode.
|
| Photo |
|
|
|
|
| CELLDISK2.0 |
|
|
|
|
| 315MB/495MB Free |
|
|
|
| Photo | Music |
| Setup |
|
|
|
| Move | Enter | Return |
|
|
|
|
| 1/10 Page |
Photo | Up Folder |
|
|
|
|
|
|
|
|
| |
Folder |
|
|
|
|
|
Jan 22, 2007 |
|
|
|
|
|
1 / 14 |
|
|
|
|
|
|
|
| Photo 0001 | File 2 | None |
| File 4 | File 5 | File 6 | File 7 | File 8 |
CELLDISK2.0 |
|
|
|
|
|
315MB/495MB Free | File 9 | File 10 | File 11 | File 12 | File 13 |
| |||||
|
| Photo Menu | Move | Open | Return |
:Folder icon
:Photo icon
:Move to the previous folder stage icon
English - 64
