Setting Up Anynet+
The following settings help set the Anynet+ functions.
To use the Anynet+ Function, Anynet+
1Press the Anynet+ button.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2Press the ENTER button to select Anynet+
3Press the ▲ or ▼ button to select On, then press the ENTER button.
➢The Anynet+
➢If you select Off, Anynet+
➢When the Anynet+
TV Air 28 |
|
|
|
|
Recevier: | On |
| ||
Connect Recorder |
| |||
Setup |
|
|
|
|
Move | Enter | Exit |
| |
|
| Anynet+ Setup |
| |
Anynet+ | : OffOff |
| ||
Auto Turn Off |
| : OffOn |
| |
Searching Connections |
| |||
Move |
|
| Enter | Return |
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
2Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.
3Press the ▲ or ▼ button to select On, then press the ENTER button.
➢The Auto Turn Off function is enabled.
➢If you select Off, the Auto Turn Off function is canceled.
Press the EXIT button to exit.
Anynet+ Setup |
| ||
Anynet+ |
| : On |
|
Auto Turn Off |
| : OffOff |
|
Searching Connections | On |
| |
|
|
| |
Move | Enter | Return | |
➢The active source on the TV remote must be set to TV to use the Anynet+ function.
➢If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.
Scanning and Switching between Anynet+ Devices
1Press the Anynet+ button.
➢ Anynet+ devices connected to the TV are listed.
2Press the ▲ or ▼ button to select a particular device and press the ENTER button. It is switched to the selected device.
3If you cannot find a device you want, press the ▲ or ▼ button to select Searching Connections, then press the ENTER button.
The message Configuring Anynet+ connection... is displayed.
When searching devices complete, the connected devices are listed in the Anynet+ menu.
TV Air 28
Recevier: On
Connect Recorder
Setup
Move | Enter | Exit |
|
|
| Anynet+ Setup |
| ||
Anynet+ | : | On | ► | |
Auto Turn Off | : | On | ► | |
Searching Connections |
| ► | ||
➢ Switching to the selected devices may take up to 2 minutes. You cannot cancel the |
|
|
|
operation during the switching operation. | Move | Enter | Return |
➢The time required to scan for devices is determined by the number of connected devices.
➢When the device scan is complete, the number of devices found are not displayed.
➢Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices.
➢If you have selected an external device by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an external Anynet+ device by using the Anynet+ button.
Continued...
English - 73
