Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a while when your TV starts.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
1Press the POWER button on the remote control.
The message Menu language, Shop Mode, Channels and Time will be set. is displayed.
2Press the ENTER button, the Select the language of the OSD menu is automatically displayed.
Press the ▲ or ▼ button to select language, then press the ENTER button. The message Select Home Mode when installing this TV at home. is automatically displayed.
3Press the ◄ or ► button to select Shop or Home, then press the ENTER button.
➢The default selection is Home.
➢We recommend setting the TV to Home mode for the best picture in your home environment.
➢Shop mode is only intended for use in retail environments.
➢If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press any Volume button and then hold down the MENU button for five seconds on the TV panel.
iMenu language, Shop Mode, Channels and Time will be set.
Start
Plug & Play
Select the language of the OSD.
Menu Language :English
Español
Français
Move 
Enter 
Skip
Plug & Play
Select Home Mode when installing this TV at home.
ShopHome
Move 
Enter 
Skip
4Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER button to select Start.
➢If the antenna is connected to ANT1 IN(AIR), select Air and if it is connected to ANT 2 IN(CABLE), select Cable.
➢If both ANT 1 IN(AIR) and ANT 2 IN(CABLE) are connected, select the Air + Cable.
➢In Cable mode, select the correct analog signal cable system source among STD, HRC, and IRC by pressing the ▲ or ▼ button, then press the ENTER button. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
To memorize the channels, press the ► button to select Start, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in your particular area.
Plug & Play
Select the antennas to memorize.
Air |
| Start |
Cable |
| Start |
Air + Cable |
| Start |
Move | Enter | Skip |
| Plug & Play |
|
Select the cable system. |
| |
Analog |
| Start |
STD |
| |
HRC |
|
|
IRC |
|
|
Digital |
|
|
STD |
|
|
HRC |
|
|
IRC |
|
|
Move | Enter | Skip |
Continued...
English - 15
