PROBLEM | POSSIBLE CAUSE |
| SOLUTION |
Display flashes. | There was a power failure. | • | Reset the clock. |
|
|
| |
Drawer does not | The drawer is out of alignment. | • Fully extend the drawer and push it all the | |
slide smoothly or |
|
| way in. See the page 57. |
drags. |
|
|
|
The drawer is | • | Reduce weight. Redistribute drawer | |
| load is unbalanced. |
| contents. |
|
|
| |
Warming drawer will | A fuse in your home may be blown | • Replace the fuse or reset the circuit | |
not work. | or the circuit breaker tripped. |
| breaker. |
|
|
|
|
| The controls are not set correctly. | • | See the chapter on using the warming |
|
|
| drawer on page 27. |
|
|
|
|
Excessive | There is liquid present in the | • | Remove the liquid. |
condensation in the | drawer. |
|
|
drawer |
|
| |
Uncovered foods. | • Cover food with a lid or aluminum foil. | ||
|
|
| |
| The temperature is set too high. | • Adjust the temperature to a lower setting. | |
|
|
| |
Food dries out in | Moisture is escaping. | • Cover food with a lid or aluminum foil. | |
the warming drawer. |
|
|
|
The drawer is not fully closed. | • | Push the drawer in until the latch engages. | |
|
|
|
|