Samsung HT-F9730W/ZA user manual Troubleshooting, Appendix, English

Models: HT-F9730W/ZA HT-F9730W

1 61
Download 61 pages 41.02 Kb
Page 56
Image 56
Troubleshooting

Appendix

Troubleshooting

Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).

 

Symptom

 

Check/Remedy

I cannot eject the disc.

Is the power cord plugged securely into the outlet?

 

 

Turn off the power and then turn it back on.

Playback does not start.

Check the region number of the Blu-ray/DVD disc.

 

 

 

Blu-ray/DVD disc purchased from abroad may not be playable.

 

 

CD-ROMs and DVD-ROMs cannot be played on this product.

 

 

Make sure that the rating level is correct.

Playback does not start

Are you using a deformed disc or a disc with scratches on the surface?

immediately when the

Wipe the disc clean.

Play/Pause button is

 

 

pressed.

 

 

Sound is not produced.

The home theater does not play sound during fast playback, slow playback,and

 

 

step motion playback.

 

 

Are the speakers connected properly? Is the speaker setup correctly customized?

 

 

Is the disc severely damaged?

Sound can be heard only

On certain Blu-ray/DVD discs, sound is output from the front speakers only.

from a few speakers and

Check if the speakers are connected properly.

not all 8.

Adjust the volume.

 

 

When playing audio from a CD, the radio, or a TV, the unit outputs sound to the

 

 

 

front speakers only.

Dolby Digital 7.1 CH

Is there "Dolby Digital 7.1 CH" mark on the disc? Dolby Digital 7.1 CH Surround

Surround Sound is not

Sound is produced only if the disc is recorded with 7.1 channel sound.

produced.

Is the audio language correctly set to Dolby Digital 7.1-CH in the information

 

 

 

display?

The remote control does

Are you operating the remote within its operational range and within the proper

not work.

angle relative to the sensor?

 

 

Are the batteries drained?

 

 

Have you selected the mode (TV/BD) functions of the remote control (TV or BD)

 

 

 

correctly?

The disc is rotating but

Is the TV power on?

no picture is produced.

Are the video cables connected properly?

Picture quality is poor

Is the disc dirty or damaged?

 

and the picture is

A poorly manufactured disc may not be playable.

 

shaking.

 

 

Audio language and

Audio language and subtitles will not work if the disc does not contain them.

subtitles do not work.

 

 

56 English

Page 56
Image 56
Samsung HT-F9730W/ZA user manual Troubleshooting, Appendix, English