![](/images/new-backgrounds/1239044/239044281x1.webp)
Battery
Please refer to the following instructions when running the computer on battery power without connecting the AC power.
A
Before You Start!
Carefully read and follow the precautions printed on the battery before using the battery.
Precautions
Use only chargers specified in the User Manual.
Caution Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire. Never cause a short circuit between the battery pack terminals or disassemble the battery pack.
Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the battery.
Please refer to the system operation environment ( p.172) of this manual and operate and store the battery at room temperature.
Installing/Removing the Battery
1 Shutdown the system, close the LCD panel and place the computer upside down on a flat surface.
2 Pull the two battery latches outwards (), then remove the battery.
3 To install the battery again, slide the battery into the system.
The battery latches move inwards and fix the battery automatically.
Check if the battery latch has been moved inwards.
Note