5 Click General tab and select a LAN driver from Connect using:. Select Internet Protocol(TCP/IP) and click Properties.
The displayed LAN driver may vary depending on the LAN device type.
Click Install to add a network component as shown in the figure below: You can add a client, a service, or a protocol.
6 Configure IP settings.
Select Obtain an IP address automatically when using DHCP. If you use a static IP, select Use the following IP address and enter the values.
If the IP of your computer is not automatically assigned, contact the network administrator.
7 If all settings are made, click OK. Now the network configuration is finished.
76
