Samsung RF31FMEDBSR Sparkling water, the refrigerator, Produces sparkling water at, On/Off

(7 )

Sparkling

Water

( Hold 3 sec for Cylinder Reset )

- If you change the carbonation level	( 8 )
when the refrigerator is making	Cubed /
sparkling water, the refrigerator	Crushed
produces sparkling water at the	(Hold 3
previous carbonation level.	sec for
	Sparkling
3) To activate the Cylinder Reset Function	On/Off)
After you change CO2 cylinders, press the
Sparkling Water button for three seconds
to activate the Cylinder Reset function.
When you activate the Cylinder Reset
function, the refrigerator starts making
sparkling water.
If you activate the Cylinder Reset function
when the Sparkling Water Production
function is OFF, the Sparkling Water
Production OFF Icon turns off and the
Carbonation Level icons light up in
rotation (Level-1 → Level-2 → Level-3
→ Level-1, etc.), indicating that the
refrigerator is making sparkling water.
While the refrigerator is making sparkling
water, it will not dispense sparkling water.
If you set the Sparkling Water Production
function to OFF within several seconds
after activating the Cylinder Reset
function, the Sparkling Water Production
OFF Icon turns on and the refrigerator
does not make sparkling water.
Sparkling water that is produced as the
result of activating the Cylinder Reset
function may have a carbonation level
higher than the current Carbonation Level
setting. If you want accurate carbonation
level in the next production, you need
to empty the tank before you start
production.

The Cubed/Crushed button serves two purposes:

-To select the type of ice you want dispensed.

-To turn the Sparkling Water Production Function on and off.

1) To Select the type of ice

Press the Cubed/Crushed button to select the type of ice you want dispensed.

Each time you press the button, the cubed and crushed ice modes alternate and the Cubed or Crushed ice icon lights up, indicating your selection.

2)Sparkling Water Production Function On / Off

Each time you press this button for 3 seconds, you turn the Sparkling Water Production function on or off. When you turn on the Sparkling Water Production function, the refrigerator begins to make sparkling (carbonated) water.

(If you turn off the Sparkling Water Production function a few seconds after turning it on, sparkling water production will terminate. If more than a few seconds pass, the refrigerator will start producing sparkling water. While the refrigerator

is producing sparkling water, it won’t dispense sparkling water.)

When you turn off the Sparkling Water Production function, the “OFF” Icon on the Display Panel turns on.

When you turn on the Sparkling Water Production function, the “OFF” Icon on the Display Panel turns off. When the Sparkling Water Production function is off, the refrigerator does not make sparkling water.

If you turn off the function when the refrigerator is in the middle of making sparkling water, it halts the function after finishing the current operation.

Your refrigerator was manufactured with the Sparkling Water Production function set to “OFF”. When you are connecting the water lines, or mounting or replacing the CO2 Cylinder, turn off the Sparkling Water Production function before you begin. Turn on the function only after you have completed the work.

To produce sparkling water, you must install a CO2 Cylinder. For instructions, see Installing and Using CO2 Cylinders.

02 OPERATING

operating _21

DA68-02894A-09.indb 21 2013. 12. 3. ￿￿ 8:45