Samsung RF31FMESBSR Operating your French Door Refrigerator, Using The Control Panel, operating

Operating your French Door Refrigerator

USING THE CONTROL PANEL

RF31FMES**

(For Sparkling model Only )

1			4
13
2	14		5
3			6
12	10	11	9

78

(1 ) Touching this button turns Energy Saver Energy mode on and off. When you turn Energy Saver Saver on, the Energy Saver icon lights.

Turn Energy Saver off and the icon goes off. The Energy Saver function’s factory setting is “ON”. If condensation or water drops appear on the doors, turn the Energy Saver mode off.

(2 ) The Freezer button serves two purposes:

Freezer	-	To set the Freezer to your desired
(Hold 3		temperature.
sec for	-	To turn the power freeze function on
Power		and off.
Freeze)	1)	To set the Freezer temperature, touch
		the Freezer button to set the Freezer to
		your desired temperature. You can set
		the temperature between 5 °F (-15 °C)
		and -8 °F (-23 °C).
	2)	Power Freeze function
	Touch and hold this button for 3 seconds
	to decrease the time needed to freeze
	products in the Freezer.
	It can be helpful if you need to quickly
	freeze easily spoiled items or if the
	temperature in the freezer has warmed
	dramatically (For example, if the door was
	left open).
	When you use this function the energy
	consumption of the refrigerator will
	increase. Remember to turn it off when
	you don’t need it and return the freezer
	to your original temperature setting. If you
	need to freeze large amount of food stuff,
	activate Power Freeze function at least 20
	hours before.

( 3 )	The Alarm button serves two purposes:	02
Alarm	- To turn the door open alarm on and off	OPERATING
(Hold 3	for more than three minutes. The beeping
	- To reset the water filter life indicator.
sec for	1) Door Alarm Function
Filter	If the door alarm is set to On, an alarm
Reset	beeps if any refrigerator door is left open
	stops when you close the door. The door
	alarm function is pre-set to On in the
	factory. You can turn it off by pressing and
	then releasing the Alarm button. You can
	turn it back on in the same fashion. The
	icon lights up when the function is on.
	When the Door Alarm function is on and
	the alarm sound is triggered, the Door
	Alarm Icon will blink while the alarm
	sounds.
	2) Water Filter Life Indicator Function
	After you replace the water filter, touch
	and hold this button for 3 seconds to
	reset the water filter life indicator. When
	you reset the water filter life indicator, the
	Filter icon on the panel turns Off. The
	Filter icon will turn red to let you know it
	is time to change the water filter after six
	months (about 300 gallons). Some areas
	have large amounts of lime in their water,
	which causes the water filter to clog more
	quickly. If this is the case in your area,
	you will have to change the filter more
	frequently than every six months.

operating _19

DA68-02894A-09.indb 19 2013. 12. 3. ￿￿ 8:45