Cooling | - North American (US, Canada) Models |
Off Mode | Only ; |
| Cooling Off mode (also called Shop |
| mode), is designed for use by retailers |
| when they are displaying refrigerators on |
| the shop floor. In Cooling Off mode, the |
| refrigerator’s fan motor and lights work |
| normally, but the compressors do not run, |
| and the refrigerator and freezer do not get |
•Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard.
•When you pull the water filter, a little water can leak from the opening. This is normal. To minimize the water leaks, keep the filter cartridge horizontal when you pull it.
cold. To start Cooling Off mode, touch |
and hold the Energy Saver button and |
the Freezer button for 5 seconds during |
normal operation. The refrigerator chime |
• To prevent overflow, empty the water filter tray ( 3 ) and dry
2
sounds and the temperature display |
flashes OFF. |
To cancel Cooling Off mode, touch and |
hold the Energy Saver and the Freezer |
buttons again for 5 seconds. |
CHANGING THE WATER FILTER
To reduce the risk water damage to your WARNING property DO NOT use generic brands of
water filters in your SAMSUNG |
|
Refrigerator. |
|
USE ONLY SAMSUNG BRAND |
|
WATER FILTERS. SAMSUNG is not |
|
legally responsible for any damage, |
|
including, but not limited to, property | (Red) |
damage caused by water leakage |
from the use of a generic water fi lter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filters.
The Filter light turns red to let you know when it is time to change your water fi lter cartridge.
To give you time to get a new fi lter, the red light comes on just before the capacity of the current
filter runs out. Changing the fi lter on time provides you with the freshest, cleanest water from your refrigerator.
To change the water filter, follow these steps:
1.Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn,
2
1
2.Pull the water filter ( 1 ) from the case filter ( 2 ).
• To change the water filter more easily, shut off the water supply valve.
26_ operating
around the filter case | 3 |
( 2 ). |
|
3.Insert the new filter into the filter case ( 4 ).
4.Push the filter, and then turn it clockwise until it locks.
• If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve.
•The locked symbol should be lined up with the indicator line.
4
5. Touch the “Alarm/hold
3 sec for Filter Reset”
button ( (Filter Reset) ) for about 3 seconds to reset
the water filter. The color
of the indicator ( ) changes from red to off.
6.If you turned off the water supply, turn it back on.
For a replacement water filter, you can visit your local home Improvement center or contact the Samsung Parts distributor.
To order more water filter cartridges, contact your authorized Samsung dealer. Be sure the replacement water filter has the SAMSUNG logo on the box and on the water filter.
Removing any residual matter inside the water supply line after installing the water filter.
1.Turn ON the main water supply and supply
2013. 12. 3. 8:45 |