Samsung RF31FMEDBBC Making Minor Adjustments To The Doors, Installing The Water Dispenser Line

Models: RF31FMEDBBC RF31FMESBSR RF31FMEDBSR

1 156
Download 156 pages 49.58 Kb
Page 14
Image 14
How to adjust the level

How to adjust the level

1.Open the freezer drawer and remove the lower basket.

2.Insert a flat-blade screwdriver (-) into the notch on the left control lever, and turn it counter- clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.)

flat-blade screwdriver (-) Control Lever

MAKING MINOR ADJUSTMENTS TO THE DOORS Both control levers must be touching the CAUTION floor to avoid possible personal injury or

property damage because of tipping.

If the right side is lower, perform the same procedure, but with the right control lever.

It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors.

MAKING MINOR ADJUSTMENTS TO THE DOORS

Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator.

Fixed part

Adjustment

part

The left door is fixed. To make minor door adjustments, adjust only the right door.

1.Pull out the flex door ( 1 ) to reveal the lower hinge ( 2 ).

2.Insert the supplied allen wrench (5/32”) ( 3 ) into the shaft ( 4 ) of the lower hinge.

3.Adjust the height by turning the hex wrench ( 3 ) clockwise ( DOWN ) or counter clockwise (

UP ).

 

 

When you turn the hex wrench counter-

 

clockwise (

), the door will move up.

 

 

2

 

 

3

3

 

4

 

1

INSTALLING THE WATER

DISPENSER LINE

A water dispenser with a fi lter is one of the helpful features on your new refrigerator. To help promote better health, the water fi lter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that. The water line also connects to the ice maker.

For the ice maker to operate properly, water pressure of 20-125 psi (138 ~ 862Kpa) is required.

14_ setting up

DA68-02894A-09.indb 14

2013. 12. 3. ￿￿ 8:45

Page 14
Image 14
Samsung RF31FMEDBBC Making Minor Adjustments To The Doors, Installing The Water Dispenser Line, How to adjust the level