Samsung RF31FMESBSR, RF31FMEDBSR, RF31FMEDBBC user manual Lock

( 5 )
Fridge	The Fridge button serves two purposes:
(Hold 3
	- To set the Fridge to your desired
sec for
	temperature.
Power
	- To turn the Power Cool function on
Cool)
	and off.
	1) To set the Fridge temperature
	Press the Fridge button to set the
	refrigerator to the temperature you want.
	You can set the temperature between
	44°F (7°C) and 34°F (1°C) .
	2) Power Cool function
	Touch and hold this button for 3 seconds
	to decrease the time needed to cool
	products in the Refrigerator. It can be
	helpful if you need to quickly cool easily
	spoiled items or if the temperature in
	the fridge has warmed dramatically (For
	example, if the door was left open).

(6 ) The Ice Off button serves two purposes:

Ice Off	- To turn the Ice maker on and off
(Hold 3	- To turn the Child Lock Function on
sec for	and off.
Child	1) Ice Off Function
Lock)	If you don’t want to make more ice, press
	the Ice Off button.
	2) Child Lock Function
	Touch and hold this button for 3 seconds
	to lock the display, the Flex Zone panel,
	and the dispenser buttons so the buttons
	can not be used.
	When the Child Lock is on, the refrigerator
	does not dispense ice or water even if you
	press the Dispenser Lever.
	The child lock icon lights up to indicate
	you’ve activated the child lock function.
	Press 3 seconds to unlock.
(7)
Cubed Ice
(8)	Press the Cubed Ice or Crushed Ice
Crushed
Ice	button to select the type of ice you want
	dispensed.
	Each time you press the button, the
	cubed and crushed ice modes alternate
(Cubed)	and the Cubed or Crushed ice icon lights
	up, indicating your selection.
(Crushed)

( 9 )	If you don’t want to make more ice, touch
Ice Off
	the Ice Off button.
	The icon will light up and the Ice-Maker
	stops making ice.
	We recommend you stop ice
	making if the following occur:

-There is enough ice in the ice bucket.

-You want to save water and energy.

-Water is not being supplied to the refrigerator.

If the ice maker function is ON, and the water line is not connected, there will be a water valve noise from the back of the unit. If this occurs, press the Ice Off (Hold 3sec for child lock) button for less than 3 seconds until the Ice Off Indicator ( ) illuminates.

To save electricity, the Panel Display turns off automatically under the following conditions: When no button has been pressed, when no doors are open, or when no Dispenser Lever has been pushed. However, the icon indicating your cubed or crushed ice selection will stay on. When you press a button, open a door, or push a Dispenser Lever, the Panel Display will turn on again. All function keys, except Energy Saver and the Cubed and Crushed keys will become operational after you remove your finger from the button you pressed.

( 10 )	Water filter usage
Filter
	This icon lights up when you need
	to change the filter, usually after the
	refrigerator has dispensed about 300
	gallons of water (after about 6 months).
	After you install the new water filter, reset
	the filter indicator by touching and holding
	the Hold 3sec for Filter Reset button for
	3 seconds.
	- If water is not dispensing or
	dispensing slowly, you need to
	replace the water filter because
	the water filter is clogged.

-Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.

02 OPERATING

operating _25

DA68-02894A-09.indb 25 2013. 12. 3. ￿￿ 8:45