Samsung RF31FMESBSR Turning Off the Sparkling Water Function, Replacing a Cylinder, operating

Models: RF31FMEDBBC RF31FMESBSR RF31FMEDBSR

1 156
Download 156 pages 49.58 Kb
Page 34
Image 34
Turning Off the Sparkling Water Function

The Carbonation Level is set to Level 2 at the factory. If the sparkling water tastes too strong or too weak, change the carbonation level. Level 1 provides a milder carbonation, Level 3 a stronger carbonation.

If there is a power interruption when the refrigerator is making sparkling water, the refrigerator may re-start the carbonation process when power returns and put too much carbonation into the water. If this occurs, we recommend throwing out the overly carbonated water and starting the process again.

The lifetime of the CO2 cylinder can vary, depending on the Carbonation Levels you choose.

Turning Off the Sparkling Water Function

To turn off the Sparkling Water function, press the Cubed/Crushed button for 3 seconds.

Replacing a Cylinder34_ operatingManual background OFF Icon On

Press for 3 seconds

Any sparkling water remaining in the Sparkling Water tank after you have turned off the Sparkling Water function can still be dispensed.

Replacing a Cylinder

When the taste of sparkling water is weak or non-existent, replace the current cylinder with a new cylinder. To replace a cylinder, follow these steps:

1.Lift up the Lever holding the cylinder in place.

2.Pull the Cylinder out of the Support.

3.Rotate the Cylinder counterclockwise to remove it from the Regulator.

4.To install a new cylinder, follow the directions for installing a cylinder starting at Step 2 in Installing a Cylinder into the Refrigerator on pages 17 and 18.

34_ operating

DA68-02894A-09.indb 34

2013. 12. 3. ￿￿ 8:45

Page 34
Image 34
Samsung RF31FMESBSR, RF31FMEDBSR, RF31FMEDBBC Turning Off the Sparkling Water Function, Replacing a Cylinder, operating