2.Pull the Cylinder out of the Support.
3.Rotate the Cylinder counterclockwise to remove it from the Regulator.
4.To install the new cylinder, follow the directions for installing a cylinder starting at Step 2.
5.Press the Sparkling Water button for 3 seconds to turn the Cylinder reset function on.
•If you replace the CO2 Cylinder during Sparkling Water Production (The Carbonation Level Icon turns on in the order of 1 → 2 → 3 → 1.), wait until the refrigerator completes production before turning the Sparkling Water Production function back on. Because you interrupted production, the sparkling water may be over carbonated. We recommend that you throw out the overly carbonated water.
Operational Notes
•Be sure to use genuine Soda Stream Cylinders from authorized resellers.
•The refrigerator starts making sparkling water about 10 seconds after you turn on the Sparkling Water Production function.
•If you open the refrigerator door while the refrigerator is making sparkling water, it will stop. When you close the door, it will resume making sparkling water in about a minute.
•If there is a power interruption when the refrigerator is making sparkling water, the refrigerator may
•If you keep dispensing sparkling water, the water stream may become unstable or break up. This is caused by changes in pressure in the Sparkling Water Production Tank. It is not a defect.
•If the water hose is kinked or water is not
supplied properly, the Carbonation Level of the Sparkling Water will be high. This occurs because the the same amount of the carbon dioxide (CO2) is dispensed by the Cylinder regardless of the amount of water in the Production Tank.
•The useful life of the Cylinder will vary, depending on the level of carbonation you select.
•If you are not going to be home for a long period of time, do not want to use the Sparkling Water function any more, or you are moving:
• Please remove the CO2 carbonator from CAUTION the compartment located in the left door
of the refrigerator before you transport the refrigerator.
1.Press the Cubed/Crushed button for three seconds to turn off the Sparkling Water function.
2.Empty the Sparkling Water tank by dispensing all the water in the tank.
3.Remove the CO2 Cylinder.
operating _43
02 OPERATING
2013. 12. 3. 8:46 |
