Samsung RF56J9041SR How to level the refrigerator, The legs should be located on the back of under the each door

LEVELING THE REFRIGERATOR AND ADJUSTING HEIGHT AND GAP OF THE DOORS

How to level the refrigerator

To avoid a hazard due to instability of the refrigerator, please place the refrigerator on a horizontal support and levelled in accordance with the following instruction for installation.

Failing to do so may result in the refrigerator tipping and a personal injury.

If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.

Setting up the refrigerator on an uneven surface will cause the refrigerator to be uneven.

-- When install the refrigerator, the legs should touch the floor surely.The legs should be located on the back of under the each door.Insert it with flathead screwdriver and tighten up to arrow direction.

If the Refrigerator is put on a floor that is not level, it can cause a height difference between the doors.

• Insert a Flat-Head (-) Screwdriver into the slot
in the Leveling Leg Control Lever and adjust the	up
level by turning the Control Lever clockwise or
counter-clockwise.
When you rotate the Lever clockwise, you raise
the refrigerator.	setting
When you rotate the Lever counter-clockwise,
you lower the refrigerator.

Flat-blade
	Control Lever
screwdriver(-)

•If the Refrigerator is not level back and front, put a solid panel (such as a plastic panel, a plastic ruler, etc.) on the floor where the rear legs will rest, and then fix it in place with plastic tape.

When you push in the Refrigerator, make sure the rear legs rest on the panel.

•If you have a wooden floor or similar soft floor, take care not to damage the floor when pushing the Refrigerator into place.

English - 23

DA68-03194F-04.indb 23 2017. 6. 7. �� 8:11