Samsung sc-mx20r, SC-MX20H, SC-MX20ER, SC-MX20EL Pressing the Recording start, Unnecessary files

Recording

Symptom		Explanation/Solution
	•	Press the MODE button to set Movie Record mode (	).
	• There is not enough free space to record on the built-in memory or memory
Pressing the Recording start/		card.
	•	Check if memory card is not inserted or write-protect tab is set to lock.
stop button does not start
	•	The internal temperature of your camcorder is unusually high.
recording.
		Turn off your camcorder and leave it for a while in a cool place.
	• Your camcorder is damp and moist inside (condensation). Turn off your
		camcorder and leave it for about 1 hour in a cool place. ➥page 96
	• The estimated recording time may vary depending on contents and features
The actual recording time is less		used.
	•	Recording a fast-moving subject increases the bit rate and consequently
than the estimated time.
		the amount of storage space required for the recording, which can lead to a
		shorter available recording time.
	• There is no more free space for recording on the storage media.
		Back up important files on your PC and format the storage media or delete
		the unnecessary files.
	• If you make a frequent recording or deletion of files, the performance of the
The recording stops automatically.		built-in flash memory will be deteriorated. In this case, format the built-in
		memory again.
	• If you use the memory card with low writing speed, the memory camcorder
		automatically stops recording the movie images and the corresponding
		message appears on the LCD screen.
When recording a subject
illuminated by bright light, vertical	•	The memory camcorder is unable to record these levels of brightness.
lines appear.
			English_107