connecting to a pc
✪This chapter explains how to connect a PC using the USB cable for various actions.
- When connecting a USB cable to a PC, refer to the software installation instructions and PC specifications below.
Transferring a Recorded File through a USB Connection
•The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)
•You can transfer a recorded file on a storage media to your PC via a USB connection.
USB Connection Speed depending on the System
•High speed USB connection is supported by Microsoft (Windows) device drivers only.
•Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
• Windows XP - High speed USB on a system with Service Pack 1 or later installed.
•Windows VISTA - High speed USB on a system with Service Pack 1 or later installed.
Cyberlink MediaShow4
System Requirements
The following requirements must be satisfied to use CyberLink MediaShow4.
CPU | Intel® Pentium ®4, at least 3.0 GHz/AMD recommended | |
OS | Windows Vista or XP (Windows XP Service Pack 2) | |
* Standard installation is recommended. | ||
(Operating System) | ||
Operation cannot be guaranteed if the above OS has been upgraded. | ||
| ||
RAM | 512MB (1 GB and above recommended) | |
|
| |
Resolution | 800 x 600, | |
|
| |
USB | USB2.0 High Speed | |
|
| |
| Intel® 945GM or faster | |
| NVIDIA Geforce 6600 or higher | |
VGA | ATI Radeon X1600 or higher | |
| - On a low performance graphics system, running the MediaShow4 may cause error or not apply some of | |
| animation effects. | |
Miscellaneous | Internet Explorer 5.5 or later DirectX 9.0 or later | |
Supported media | DVD+R/RW, | |
For the compatible DVD/CD burners, refer to CyberLink web site: | ||
| http://www.gocyberlink.com/english/products/powerproducer/2_gold/comp_dvd_drives.jsp |
