3-7
Rack Requirements
Before installation of SMG-3200 system in a rack, you have to prepare a rack that meets the
following requirements.
yPrepare a rack with standard electrical facilities.
yEnsure that the rack has appropriate ventilators, if it is closed type. A closed type rack should
provide at least one ventilator with fan on the side of the rack in order to circulate cool air into
the rack.
yPay attention in a closed type rack as the ventilator may cause hot air from the lower system to
rise up to the port opening of a system installed in an upper position in the rack.
yEnsure not to block up the port or fan of installed systems, if the rack is opened type.
yEnsure that the rack is equipped with an internal power bar, and is located near power supply
units.
yEnsure that the rack has ventilators on the side as well as backside for smooth air circulation.
Required Tools
yCross-shaped medium-size screwdriver
yL-shaped Bracket
yScrews