5-15
The following is an overview of the 17 submenus found in the PSTN Configuration Menu.
No
NoNo
No Menu
MenuMenu
Menu Functions
FunctionsFunctions
Functions
0 Gateway Operation Mode Sets the system operation mode.
1 PSTN Rerouting Insert Digit When PSTN routing, it configures a trunk line access
code used in either PBX or KTS.
2 PCM Method Sets PCM mode.
3 Dial Method Sets the trunk line digit transmission method.
4SLC Signal Sets the signal type of analog interface.
5 Trunk Signal Sets the signal type of digital interface.
6 Call Control Method Sets the signal type for call control.
7 Ring Cadence Sets the system ring cadence.
8 System Tone Cadence Sets the system tone cadence.
9 CO Tone Cadence Sets the CO tone cadence.
10 Gain Control Adjusts call quality depending on the connection type.
11 Diagnosis Sets the diagnosis interval for PSTN interface.
12 MMC Port Block/UnBlock Specifies use of a specific port.
13 Display Slot Configuration Views configuration of cards installed in system slots.
14 Display Port Status Views system slots and operation status of ports.
15 Save & Exit Closes the PSTN Config uration M enu scree n with sa ving
changes.
16 Exit Closes the PSTN Configuration Menu screen witho ut
saving changes.