Samsung SOM-080AN manual Camera Setup, Border Color Gray ↔ Black

PIP POSITION: BOTTOM-RIGHT ↔ TOP-LEFT ↔

e-10TOP-RIGHT ↔ BOTTOM-LEFT.

• Select the PIP position among the four options listed above.

DISPLAY TYPE: ALL ↔ TITLE ↔ DATE/TIME ↔ NONE.

•ALL: All items will be displayed except the DATE/TIME and the

TITLE.

•TITLE: Only the CHANNEL TITLE will be displayed.

•DATE/TIME: Only the DATE/TIME will be displayed.

•NONE: Neither the DATE/TIME nor the TITLE will be displayed.

BORDER COLOR: GRAY ↔ BLACK

•GRAY : BORDER LINE COLOR is displayed in GRAY in Multi Screen mode.

•BLACK : BORDER LINE COLOR is displayed in BLACK in Multi Screen mode.

DATE TYPE: YY/MM/DD ↔ MM/DD/YY ↔ DD/MM/YY. DATE [YY/MM/DD]

•Year(YY) : 00(2000) ~ 99(2099)

•Month(MM) : 01 ~ 12

•Day(DD) : 01 ~ 31

TIME [HH:MM:SS]

•Hour(HH) : 00 ~ 23

•Minute(MM) : 00 ~ 59

•Second(SS) : 00 ~ 59

2.CAMERA SETUP

You may change CAMERA ID, LOSS DETECT, MOTION DETECT, and CAMERA PRESET VALUE.

If you click the UP/DOWN button to select “2. CAMERA SETUP” in the SETUP MENU and click the ENTER button, the following screen will be displayed.

[CAMERA SETUP]

SETUP CAMERA 1...

SETUP CAMERA 2...

SETUP CAMERA 3...

SETUP CAMERA 4...

SETUP CAMERA 5...

SETUP CAMERA 6...

SETUP CAMERA 7...

SETUP CAMERA 8...

If you click the UP/DOWN button to select a channel and click the ENTER button, the following screen of the channel will be displayed.

[SETUP CAMERA 1]
CAMERA ID	---CH1----
LOSS DETECT	ON
IRIS	ALC...
SHUTTER	OFF
WHITE BALANCE	ATW
SPECIAL...
FOCUS	ONEAF
MOTION DETECT...
EXIT	SAVE

•You may click the UP/DOWN button to set up a value and click the LEFT/RIGHT button to change the preset value.

•Select SAVE (save the changes), QUIT (exit the setting mode without saving) or PRESET (reset all the settings to the factory defaults) from the EXIT menu and press ENTER to return to the previous CAMERA SETUP menu.

You can’t return to the previous menu while in the setting mode. You can only return to the previous menu by selecting EXIT.

•Change the preset values for the other channels repeating the same steps.

Press the MENU button after completing all the settings to return to the SETUP MENU.

CAMERA ID: ---CH1----(“-” indicates blank.)

•If you click the UP/DOWN button to select “CAMERA ID” and click the ENTER button, the first “-” will be selected.

•If you click the LEFT/RIGHT button to select a text and click the ENTER button, the system will be prepared to select the next text(in the order of:0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ[ ]~_ . / )

•Repeat the same to select all the desired letters. (You can choose up to ten letters.)

LOSS DETECT: Sets the Loss Detect On/Off. (ON ↔ OFF)

IRIS: Controls the video output level through the Iris depending on the level of light coming into the camera.

•If you click the UP/DOWN button to select “IRIS” and click the LEFT/RIGHT button to select either “ALC...” or “MANUAL...”.

•ALC... : Auto Light Compensation

-If you click the LEFT/RIGHT button to select “ALC...” and click the ENTER button, the following screen will be displayed. If you click MENU button after all items are set, the system will return to the previous menu.

[ALC]

AREAPRESET...

BLCOFF

LEVEL[ 00 ] ---------- +----------

-You may click the UP/DOWN button to select “AREA” and click the LEFT/RIGHT button to select either “PRESET...” or “ USER... ”.

-If you click the LEFT/RIGHT button to select “PRESET... ” and click the ENTER button, the following screen will be displayed and the backlight compensation function will be applied to the default area.

[PRESET AREA]

•All the items, except “CAMERA ID ”and “LOSS DETECT” will be available for setting only after the system is connected to a camera (SOC-420(P) or SOC-920(P), sold separately).

Press the MENU button to return to the previous menu.