Samsung SOM-080AN manual When you want to see the Full screen, When you want the Zoom screen

e-8

3. When you want to see the FULL screen

You shall move to the desirous channel from the multi screen and click the ENTER button.

Then, if you press a number button in the remote control, you will see the desirous channel.

4. When you want to watch in Sequence Screen Mode

The Sequence screen is available only in full-screen LIVE mode. Press the SEQUENCE button when the screen is in full-screen LIVE mode to switch to the Sequence screen. You can set the switching intervals by going to "SEQUENCE" under "3. SYSTEM SETTING" on the SETUP MENU. The range of switching intervals is from one to thirty seconds. Press the SEQUENCE button again to stop the screen displayed at the present time.

The SEQUENCE button will not operate in the following cases:

•While operating in P.B. or TRIPLEX mode

•While using the SETUP Menu

•While displaying a split screen

•While displaying the Event List or Door Bell List

•While replaying events

•While zooming-in the screen

5.When you want to watch in FREEZE Screen Mode

You can stop a full or split screen temporarily and view the still screen in LIVE, P.B., TRIPLEX mode.

You can select and stop the channels you wish to stop in split screen mode.

1)Full Screen Display

If the FREEZE button is pressed, the current display will freeze, and the FREEZE icon will appear in the upper right corner of the screen. Press the FREEZE button again to exit this mode.

2)In case of Multi Screen

!If you click the FREEZE button, the FREEZE icon will be displayed.

@If you move to the desirous channel and click the ENTER button, the channel image will be paused and the text, “F” will be displayed. If you click again, this mode will be cancelled.

#If you want to see other channels with a still cut, you shall move to the desirous channel and click the ENTER button. Then the channel image will be paused and the text, “F” will be displayed. If you click again, this mode will be cancelled

$If you persist to see a still cut, you shall repeat the procedure in the above #. If you press the FREEZE button again, the whole FREEZE Mode will be cancelled.

The FREEZE button will not operate in the following cases:

•While using the SETUP Menu

•While displaying the Event List or Door Bell List

6. When you want the Zoom screen

This is available in the LIVE/P.B. Mode Full screen only.

1)If you click the ZOOM button, the area to be zoomed in will be displayed.

2)If you click this button again, the area will be enlarged twice.

3)If you click again, the area will return to the original size.

4)You may move to the area that you want to see with a direction key.

The ZOOM button will not operate in the following case:

•While using the SETUP Menu

•While Displaying the EVENT List or Door Bell List

•While Replaying events

•While operating in Sequence Mode

7.When you want to watch on PIP Screen Mode

You can watch a Picture in Picture screen in full-screen LIVE mode using the PIP button.

When you press the PIP button for the first time, the sub screen on the PIP screen is a sequence screen. After that, when you enter into PIP mode again, the sub screen which is displayed in the same screen mode as when you exited the PIP mode previously.

Using PIP Screen

1)Click the PIP button in the Full screen in the LIVE Mode.

2)Whenever you click the ENTER button with the sub-screen fixed, the main screen and sub screen will be displayed in turn.

3)You may change the main screen channel with a direction key.

4)If you click the SEQUENCE button, the sub screen will be replaced with the sub sequence screen. If you click again, the channel will be fixed.

5)You may change the position of the sub screen in

“PIP POSITION” of “1. CLOCK/DISPLAY SET” in the

SETUP MENU.

The PIP button will not operate in the following cases:

•While operating in P.B. or TRIPLEX mode

•While displaying a split screen

•While using the SETUP Menu

•While displaying the Event List or Door Bell List

•While replaying events

•While zooming-in the screen

•While operating in Sequence mode

•In case of no Video input signal

•When the input signal channel is in the Full-screen mode at the time of Single video input

8.When you want to watch the VCR output

Change to PB FULL Mode by pressing the Live/P.B./TRIPLEX button. The “PB THROUGH” picture will appear if the ENTER button is pressed while in this mode. Press the“ENTER” button again to return to the previous PB picture.

Caution

This function is only available in PB FULL Display mode.

• While replaying events