Installation, Precautions when Installing

C.VCR

•Connects to the VCR using a 6-pin connector.

•TRIGGER: Trigger output terminal for the VCR

•VIDEO IN/OUT: Video input/output terminal for the VCR

•AUDIO IN/OUT: Audio input/output terminal for the VCR

D.AUX

•Connects to another device using the 4-pin connector.

•SPOT VIDEO OUT: The terminal that allows you to supervise the specified channel within the Main screen on the additional connected monitor.

•SPOT AUDIO OUT: The terminal that allows you listen to the sound of the specified channel on the additional connected monitor.

•SLAVE VIDEO OUT: The terminal that allows you to view the Main screen displayed at the present time on the additional connected monitor.

E.ALARM

•A/O (HOT/COLD) : When an alarm occurs, the Active Make signal is output.

•A/R : Connects to the Alarm Reset terminal of VCR. When an alarm is triggered, a pulse is output.

•G : Connects to the ground terminal of VCR.

F.MON

It shall be connected to the 17'' TFT-LCD Monitor (SMT-170MP(N)) with a 20m long cable.

G.~AC IN

Connects the power cord.

H.Power Switch

It turns on or off the power.

Caution

e-5

When operating the product, the fluctuation of input voltage must be within 10% of the rated voltage and the external power outlet must be grounded, otherwise, it may cause electric shock or malfunction of the product. Do not connect heat-generating appliances such as a hair dryer, iron or refrigerator to the same power outlet in which the product is plugged, otherwise it may cause a fire or malfunction of the product. The use of an Automatic Voltage Regulator (AVR) is highly recommended to ensure that stable power is supplied.

Be sure to coil CORE-FERRITE on the connector to reduce electro- magnetic interference (EMI).

Precautions when Installing

• Be sure to turn the unit off before installing.

• Avoid shock or vibration since they may cause unit malfunction.

• Keep away from magnets, radio or TV to avoid magnetic damage.

Chapter 2: Installation

Installation Environments

This section describes the environmental requirements for safe installation and use. Install the product on a flat table or in a rack.

• During or after installing the unit, be sure to maintain the area around the unit clean.

It should be used only when level and should not be used when stood vertically or obliquely. The location in which the main system is installed and the configuration of the wiring room are very important for proper operation of the system. When the products are installed too closely together or the location is poorly ventilated, the system may not operate properly and maintenance of the system may be difficult. Sufficiently circulate the air within the system operating room and tightly fasten the cover of the main system to prevent malfunction and reduce system downs due to environmental causes.

There are high voltage parts inside. Do not arbitrarily open the cover.

• Place the unit on a flat surface and maintain temperature properly. Allow 15 cm of clearance between the rear panel and the wall.

15Cm

Install the product in a place that meets the following environmental conditions. Be sure to maintain the system under the temperatures and humidity conditions given below:

•Operating temperature : 0 °C ~ 40 °C

•Storage temperature : -20 °C ~ 60 °C

•Operating humidity : 20% ~ 85% RH

•Storage humidity : 20% ~ 95 RH

•Input voltage : AC 100 ~ 240V

•Power Consumption : Below 42 Watts

•Frequency : 50/60Hz

• Be careful not to drop any conductive materials into the hole for ventilation

SOM-080AN specifications

The Samsung SOM-080AN is a robust and versatile embedded solution developed for a wide range of applications in the fields of digital signage, IoT devices, and industrial automation. This system-on-module (SoM) is equipped with powerful hardware specifications that make it suitable for resource-intensive tasks while maintaining energy efficiency.

One of the standout features of the SOM-080AN is its processing power, driven by the latest ARM architecture. This architecture enables the module to deliver exceptional performance, handling demanding workloads seamlessly. The SoM integrates a multi-core processor, which allows for parallel processing capabilities and improves overall system responsiveness.

In terms of graphics capabilities, the Samsung SOM-080AN comes with a dedicated GPU that supports advanced graphical applications. This feature is particularly beneficial in digital signage scenarios where high-quality visuals and smooth animations are a necessity. The GPU can efficiently render 2D and 3D graphics, making it an ideal choice for interactive displays and rich media content.

Connectivity is another significant characteristic of the SOM-080AN. The module supports a multitude of interfaces, including USB, HDMI, Ethernet, and various serial communication protocols, which facilitates easy integration into existing systems. This wide range of connectivity options enables developers to create solutions tailored to their specific needs, enhancing the overall versatility of the module.

Power efficiency is a crucial consideration in modern embedded designs, and the SOM-080AN excels in this aspect. With its optimized power management technologies, the module can operate efficiently, reducing energy consumption without compromising performance. This efficiency is particularly advantageous for battery-operated devices or applications where power availability is limited.

The Samsung SOM-080AN also boasts robust thermal management features, ensuring stable operation under varying environmental conditions. This characteristic is essential for industrial applications where ambient temperatures can fluctuate significantly.

In summary, the Samsung SOM-080AN stands out as a powerful and versatile embedded module that combines high performance, advanced graphical capabilities, extensive connectivity options, and exceptional power efficiency. Its design caters to the needs of a variety of sectors, making it a prime choice for developers looking to create cutting-edge digital solutions. Whether in signage, IoT, or automation, the SOM-080AN delivers reliable performance and adaptability, setting a new standard in embedded technology.

Samsung SOM-080AN manual Precautions when Installing, Installation Environments

Models: SOM-080AN