Memorizing the Channels
Your TV can memorize and store all of the available channels for both
After the available channels are memorized, use the CH 
and CH 
buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an air or cable system).
1 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.
2 Press the ENTER button to to select “Air / Cable”
TV | Channel | |
Air / Cable | :Air |
|
Auto Program |
|
|
Channel Manager |
| |
Name |
|
|
Fine Tune |
|
|
LNA | :Off |
|
Move | Enter | Return |
TV | Channel | |
Air / Cable | : Air | Air |
Auto Program |
| STD |
Channel Manager | HRC | |
Name |
| IRC |
Fine Tune |
|
|
LNA | :Off |
|
Move 
Enter 
Return
3 Press the … or † button to select “Air”, “STD”, “HRC” or “IRC”, then press the ENTER button.
•If you are using an Air antenna, leave “Air” displayed.
If you are using a cable antenna, press the … or † button to
display the type of cable system: “STD”, “HRC” or “IRC”. (If you are not sure which type of cable system you have, contact your cable company).
Press the EXIT button to exit.
NOTE
•STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (Next page).
English - 31 
