Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the (Power) button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently: Setting the language, checking the antenna input, memorizing the channels, and setting the time.
NOTE
• The Plug & Play function operates after plugging in the TV for the first time.
1 If the television is in Standby mode, press the POWER button on the remote control. The message Start Plug & Play is displayed.
Press the ENTER button to select OK. The Language menu is displayed.
•The Language menu will automatically appear after several seconds, even if the ENTER button is not pressed.
Plug & Play
Start Plug & Play.
OK
Enter Exit
2 Press the ENTER button to enter the language. Press the … or † button to select language, then press the ENTER button.
•The message “Check antenna input” will automatically appear after several seconds, even if the ENTER button is not pressed.
3 Press the ENTER button to select OK. The menu to select signal source is displayed.
Plug & Play
Language English
Español
Português
Move | Enter | Skip |
Plug & Play
Check antenna input.
OK
Enter Skip
Continued...
English - 26