• For replacement, you will need a
Unplug TV, then use a
1 screwdriver to remove the screws.
2 Remove the Lamp cover.
Remove the Lamp cover duct
3 holding the locker and pulling it out.
Remove the screw securing
4 the Lamp by using a screwdriver.
Separate the Lamp from the
5 engine by holding the handle and pulling it out.
NOTES
•Be sure the replacement Lamp is the same type.
•After replacing the lamp, align the lamp cover with the groove and secure the screws.
•The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit).
