Rear of the TV
Please insert the card as shown.
a)EXT 1(RGB), 2(Y/C)
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
b)COMPONENT IN
Video (Y/PB/PR) and audio (AUDIO L/R) inputs for Component.
c)PC IN (PC / AUDIO)
Connect to the video and audio output jack on your PC.
d)HDMI/DVI IN
-Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection.
When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC)
-When connecting this product via HDMI or DVI to a
Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.
➢Supported modes for DVI or HDMI
| 480i | 480p | 576i | 576p | 720p | 1080i |
50Hz | X | O | X | O | O | O |
60Hz | X | O | X | X | O | O |
Component | O | O | O | O | O | O |
-Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)
e)DVI IN (AUDIO L/R)
DVI audio inputs for external devices.
English - 8
f)AUDIO OUT
Connect to the external audio amplifier.
g)DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
h)SERVICE PORT
Connector for service only.
i)ANT IN
Coaxial connector for Aerial/Cable Network.
j)DTV SERVICE
Connector for service only.
k)Common Interface Slot
Insert CI (Common Interface) card into the slot. (refer to page 66)
-When not inserting "CI CARD" in some channels, "Scramble Signal" is displayed on the screen.
-The pairing information containing a telephone number, CI CARD ID, Host ID, and other information will be displayed in about 2~3 minutes.
If an error message is displayed, please contact your service provider.
-When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated.
➢You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.
➢For further details about connection, refer to pages 73~76.
➢Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.
