product introduction
FEATURES
This product is a fingerprint recognition reader that is compatible with the proximity reader. This product can be synchronized with the controller, and is featured by reliable fingerprint recognition, all of which enables you to perform a high level management of security and time and attendance. Integrated with the proximity reader and the fingerprint recognition functions, this product will allow access to a user only if the card number matches the fingerprint of the user. Easily installed on a doorframe or a flat wall (simply replace the existing reader, if any), this product gives you high satisfaction apart from the elegant looking appearance. The product’s reliable fingerprint recognition will keep you safe from unauthorized access.
Reader Mode
RF Only Mode
-As soon as the card is authenticated, the corresponding card ID will be transferred to the controller. RF+FINGER Mode
-As soon as the fingerprint is authenticated, the corresponding card ID will be transferred to the controller.
-For a person whose fingerprint is not registered, the product will automatically switch to RF Only mode.
Error Signal Output
If the product fails to authenticate a fingerprint or unregistered card, it will produce an error signal for 500 ms. (However, if set to the Wiegand output format) The output format is of the open collector.
Output Format of Card Number
When a fingerprint is authenticated, the corresponding card number will be transferred in 26bit/34bit Wiegand.
Master Card
Used to switch between registration/deletion mode and reader mode.
Switching Operation Mode by External Input
This product can switch between RF Only and RF +Finger, according to the input setting of the product’s system mode control line (gray with red stripes).
Card Number Input Format
The user ID read by the external reader or using the card or keypad will be transferred in 26bit Wiegand/34bit Wiegand.
PRODUCT INTRODUCTION
English _ 5
