Samsung SV-DVD640 Connecting an RCA Audio/Video Input Cable, Using the Assemble Edit Function

Connecting an RCA

Audio/Video Input Cable

You can connect other audio/video equipment to your DVD-VCR using audio/video cables if the appropriate outputs are available on the equipment chosen.

Examples: ◆ You wish to copy a video cassette with the help of a second VCR.

◆You wish to play back and/or copy pictures taken with a camcorder .

☛Make sure that both the television and the DVD-VCR are switched off before connecting the cables.

1Connect one end of the RCA audio/video cable into the VIDEO INPUT socket on the front of the DVD-VCR.

2Plug the other end of the audio/video cable into the appropriate output connector on the other system (VCR or camcorder).

3Connect one end of the RCA audio cable supplied into the AUDIO INPUT sockets on the front of the DVD-VCR.

➢Take care to respect the colour coding of the left and right channels.

4Plug the other end of the audio cable into the appropriate output connectors on the other system (VCR, camcorder or Hi-Fi sound system).

AUX

1

	AUX
3	3

Using the Assemble Edit Function

This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change.

1Insert the cassette to be edited in your DVD-VCR.

2Press the ❿ll button to start playback.

3When you reach the position from which you wish to start the new recording, press the ❿ll button.

4Press the F.ADV/STEP button again as often as necessary to advance frame by frame, until the exact recording position is located.

5While the DVD-VCR is in still mode, hold the REC button (●) down for a while to activate the Assemble Edit function.

6Select the source from which you wish to record by pressing:

◆The PROG buttons for television channels

◆The INPUT SEL. button for the AV1, AV2 or AUX input sources

7Press the ❿ll button to start recording.

8When you have finished recording, press ■ .

ENG-26