Samsung SV-DVD640 manual Recoding from Another VCR or Camcorder, Brand Codes Brand Codes

Recoding from Another VCR or Camcorder

You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a camcorder.

☛It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

1Connect the DVD-VCR, from which the cassette is to be copied, to the appropriate SCART audio and video input connectors on the rear of your DVD-VCR, as indicated on page 8.

2Insert a blank cassette in your DVD-VCR.

3Insert the pre-recorded cassette in the other video source (VCR or camcorder).

4Press the INPUT SEL. button to select the appropriate input on your DVD-VCR:

◆AV1, AV2 for the SCART input

◆AUX for the RCA input

5Start playing back the cassette to be copied.

6Hold REC (●) down for a while to start recording on your DVD-VCR.

7When you have finished recording, press ■ on both VCR and DVD-VCR.

➢If you wish to view the cassette being copied:

◆Your DVD-VCR must be connected as usual to the television (see page 6 for further details).

Using the TV Buttons on the Remote Control

Your DVD-VCR remote control will work with Samsung televisions and compatible brands.

To determine whether your television is compatible, follow the instructions below.

1Switch your television on.

2Point the remote control towards the television.

3Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate numeric buttons.

Brand Codes Brand Codes

SAMSUNG	01 to 06	PHILIPS	02,	20, 22
AKAI	09, 23	SABA	13, 14, 22 to 24
GRUNDIG	09, 17, 21	SONY	15,	16
LOEWE	02	THOMSON 13,		14, 24

PANASONIC 08, 23 to 27 TOSHIBA 07, 16 to 19, 21

Result: If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.

‚➢ If several codes are indicated for your television brand, try each one in turn until you find one that works.

☛When you change the batteries in the remote control, you must reprogramme the code, following the same procedure.

You can then control the television using the following buttons.

Button	Function
STANDBY/ON	Used to switch the television and
	DVD-VCR on and off.
TV or VCR	Used to switch between the TV and
	VCR modes.
INPUT SEL.	Used to select an external source.
VOL + or –	Used to adjust the volume of the
	television.
PROG/TRK	Used to select the required
( or )	programme.
TV MUTE	Used to mute the volume of the
	television.

➢The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.

ENG-27