Samsung SV-DVD640 manual Using the Tape Counter, Index Skip Search, Tape counter

Searching for a Specific Sequence Using the Tape Counter

Index Skip Search

This feature will enable you to fast forward/rewind to a specific point on a tape: E.g. if you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the SEARCH button.

1After pressing the SEARCH, press the

corresponding or❷ buttons, until the Intro Scan option is selected.

2Press the OK or ❿.

3Press the ➛➛ or ❿❿ buttons twice more.

This will take you directly to the start of the desired programme is located.

4These Index searches can be made forwards: (press ❿❿) or backwards: (press ➛➛).

(➛➛ -20 ● ● 0 ● ● +20 ❿❿✌

5To cancel an Index search simply press the ❿II or ■ button.

INDEX SEARCH : - 6

The tape counter:

◆Indicates the elapsed time in the play and record modes (hours, minutes and seconds)

◆Is reset when a cassette is inserted in the DVD-VCR

◆Allows you to find the beginning of a sequence easily

☛If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.

1Insert a cassette in your DVD-VCR.

2To set the tape counter to zero at the beginning of a sequence:

◆Press INFO. twice to display the counter

◆Press CLEAR when you want to set the tape counter to zero

0:00:00

3When you are ready,

◆Start playback or Recording.

◆Press the ■ button.

◆To fast-froward or rewind to the sequence at which the counter was set to zero, press ➛➛ or

❿❿.

➢Some DVD-VCR information, such as the counter, can be displayed on the television screen (unless you have deactivated the Screen messages mode; refer to page 17).

Press INFO. :

◆Once to display the current function, programme number, recording speed, date, time and counter

◆Twice to display the counter only

◆Three times to display the time remaining on the cassette

◆Four times to clear the display

ENG-25