![](/images/new-backgrounds/1215021/21502117x1.webp)
Connecting
1AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of the
After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.
2By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
Aerial |
Satellite Receiver or other Equipment |
Aerial Connector |
2 |
1 |
TV |
SCART Cable |
RF coaxial cable |
Plug & Auto Set up
Your
1Connect the coaxial cable as indicated on page 6 (Connecting Your
2Plug the
Result : The Language Set menu is displayed.
3Select the required language by pressing the
or ❷ buttons.
4Press OK to store the language selected. Result: A message appears.
5Press OK button.
6Press OK to start the auto scanning.
◆The number of stations automatically stored by the VCR depends on the number of stations that it has found.
7The current time and date are displayed automatically.
Check the date and time. if it is :
◆Correct, Press RETURN button twice to exit the menu.
◆Incorrect, see page 9.
Auto setup
Please wait
00 %
|
|
|
|
|
|
|
|
|
|
|
| Clock Set |
|
|
| Time | Date | Year |
| |
|
|
|
|
| ||
|
| 12 | : 00 | 1 / JAN / | 2004 THU |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
➢Auto preset can be performed by pressing ■ on the VCR continuously for 5 seconds or more with no tape inserted.