![](/images/new-backgrounds/1215021/21502141x1.webp)
Modifying ShowView Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press RETURN a second time to confirm.
If you wish to... | Then... |
| |
Select an input source other | ◆ | Press the ➛ or ❿ buttons, until the PR selection mode. | |
than the tuner (AV1, AV2 or AUX) | ◆ | Press the INPUT SEL. button one or more times to change the | |
|
| input source selection. | |
|
| Result: The programme number is replaced by: | |
|
| • The AV1, AV2 or AUX source using the INPUT SEL. | |
|
|
| button for a satellite tuner or external video source |
| ➢ The input source must be selected before changing any other | ||
|
| value. |
|
|
|
| |
Record a programme every day | ◆ | Press the ➛ or ❿ buttons, until the DAY selection mode. | |
(Monday to Sunday) at the same time | ◆ | Press the | or ❷ buttons, until the DLY (Daily) value is |
|
| displayed. |
|
|
|
| |
Record a programme every week | ◆ | Press the ➛ or ❿ buttons, until the DAY selection mode. | |
on the same day and at the same time | ◆ | Press the | or ❷ buttons, until the W- (Week) value is |
|
| displayed, followed by the required day. | |
|
| Example: | |
|
|
| |
Extend the recording time | ◆ | Press the ➛ or ❿ buttons, until the STOP selection mode. | |
| ◆ | Press the | or ❷ buttons to increase or decrease the stop |
|
| time. |
|
|
|
| |
Select the recording speed | ◆ | Press the ➛ or ❿ buttons, until the recording speed selection | |
|
| mode. |
|
| ◆ | Press the | or ❷ buttons until the correct indication is |
|
| displayed: |
|
•AUTO (Auto Tape Speed Select)
•SP (Standard Play)
•LP (Long Play)
Select the PDC recording | ◆ | Press the ➛ or ❿ buttons, until the PDC off mode. |
| ◆ | Press the or ❷ buttons until the “On” indication is displayed. |
☛ Do not select PDC unless you are sure the programme you wish to record is broadcast with PDC. If you do set PDC On (by selecting “On” in the right - hand column on the screen), then you must set up the