Samsung SV-DVD640 manual Tuning Your Television for, Setting the Date and Time

or❷ buttons to increase or decrease

Tuning Your Television for the

DVD-VCR

It is only necessary to tune your DVD-VCR if you are not using a SCART.

➢To view pictures from your DVD-VCR when a Scart cable is used, the television must be set to the audio/video mode (AV).

1Switch on the television.

2Switch on the DVD-VCR by pressing STANDBY/ON on the front of the DVD-VCR or STANDBY/ON on the remote control.

3Select a programme position on the television to be reserved for use with your DVD-VCR.

4Insert the video cassette in the DVD-VCR. Check that the DVD-VCR starts reading the cassette;

if not, press ❿II button.

5Start a scan on your television or set the television to UHF channel 36.

6Fine tune the television until the pictures and sound are obtained clearly.

7If you cannot find the pictures and sound, or there is interference from nearby channels, it may be necessary to change the setting of the DVD-VCR output channel (see Setting the DVD-VCR Output Channel on page 14 and Problems and Solutions on page 45).

8When the picture and sound are perfectly clear, store this channel at the desired programme position on the television.

Result: That programme is now reserved for use with your DVD-VCR.

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:

◆Automatically stop programme recording

◆Preset your DVD-VCR to record a programme automatically

You must set the date and time when:

◆You purchase the DVD-VCR

☛◆ The time and date are set automatically from the broadcast signal. If the signal is weak or ghosting occurs, the time and date may not be set automatically.

In this case, they should be set manually.

◆Do not forget to reset the time when you change clocks from winter to summer time and vice versa.

1After pressing the MENU, press the OK or ❿. Result: The Setup menu is displayed.

2 Press the corresponding	,❷ buttons to select
the Clock option.

3Press the OK or ❿ to select this option. Result: The Clock Set menu is displayed.

Clock Set

Time	Date	Year
12 : 00	1 / JAN /	2004 THU

4Press ➛ or ❿ to select the hour, minutes, day, month and year.

Result: The option selected highlight.

5 Press the the value.

Result: The day of the week is displayed automatically.

➢	You can hold the or❷ buttons down to scroll
	more quickly through the values.

6On completion, press RETURN to exit the menu.

ENG-9