![](/images/new-backgrounds/1215021/21502143x1.webp)
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the
☛Before presetting a recording, check that the date and time are correct.
1Insert the cassette and press TIMER on the remote control.
Result: The Timer Method is displayed.
Timer Method
Standard
ShowView
2Press the OK button to select Standard option. Result: The TIMER PROGRAMMING menu is
displayed.
3Press ❿ to select the input source.
4 Select the required station by pressing the ,❷ buttons or INPUT SEL. to select the AV1, AV2 or AUX input sources.
5Press ❿ to select the recording day.
6 Select the required day by pressing the or❷ buttons.
7Press ❿ to select the recording start time.
8Select the required hour value by pressing the or❷ buttons.
9Press ❿ to select the minutes.
10Select the required minute value by pressing the or❷ buttons.
11Press ❿ to select the recording stop time.
12Select the required recording stop time by pressing
the or❷ buttons, following the same procedure as when selecting the recording start time.
13Press ❿ to select the recording speed.
14 | Press the | or❷ buttons to select the SP |
| (Standard Play), LP (Long Play), Auto (Auto Tape | |
| speed Select) recording speeds. | |
15 | Press the | or❷ buttons to toggle between the |
PDC mode (marked On) and the non PDC mode (marked Off).
16When you have finished, press the RETURN button.
17Press the STANDBY/ON button to activate the timer. Result: Before starting recording, the
compares the timer duration with the remaining time on the cassette.
➢Auto Tape Speed select. The
Checking a Preset Recording
You can check your preset recordings:
◆When you have finished presetting the
◆If you have forgotten which programmes will be recorded
1Press TIMER on the remote control. Result: The Timer Method is displayed.
2Press the OK button to select Standard option. Result: The TIMER PROGRAMMING menu is
displayed.
3 Press the or❷ buttons to select the required programme.
4Press the ➛ or ❿ buttons to select and change any values as required. For more details, refer to the previous page.
5On completion, press RETURN twice.