Display Indicators
1 | 2 | 3 | 4 | 5 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6
1The DVD Deck is active
2A DVD, VCD, CD or SVCD is loaded
3The time, counter position, time remaining or current deck status is displayed
4VHS tape is inserted
5The VCR Deck is active
6A Timer Recording is programmed or in progress.
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you:
◆Purchase the
◆Find that the remote control is no longer working correctly
1Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control.
2Insert two AAA, RO3 or equivalent batteries, taking care to respect the polarities:
◆+ on the battery with + on the remote control
◆– on the battery with – on the remote control
3Replace the cover by aligning it with the base of the remote control and pushing it back into place.
1 |
➢Do not mix different battery types (manganese and alkaline for example).
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from one of the following sources:
◆An outdoor aerial
◆An indoor aerial
◆A cable television network
◆A satellite receiver
☛Make sure that both the television and the DVD- VCR are switched off before connecting the cables.
1Remove the aerial or network input cable from the television.
2Connect this cable to the 75Ω coaxial socket marked 
on the rear of your
3Plug the coaxial cable supplied into the TV socket on your
4Plug the other end of the coaxial cable into the connector previously used for the aerial on the television.
5To obtain better quality pictures and sound on your television, you can also connect your
2 |
TV |
|
4 | 3 |
|
