Samsung SV-DVD640 manual Setting Up the Display Options, TV Aspect, Black Level, Ntsc Disc Output

Setting Up the Display Options

1With the unit in Stop mode, press the MENU button.

2Select DVD using ,❷ buttons, then OK or ❿ button.

Setup

Setup

Display Setup

Setup :

3	Select Display Setup using ,❷ buttons, then
	press the OK or ❿ button.
4	Use the ,❷ buttons to select the desired item.
	Then press the OK or ❿ button.
			Display Setup
		TV Aspect	: 4:3 L-Box
		Black Level
		NTSC Disc Output	: PAL60
		DVD Out	: RGB

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

1.4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

2.4:3 Pan Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

3.16:9 Wide : You can view the full 16:9 picture on your widescreen TV.

Black Level

Adjusts the brightness of the screen.(On/Off)

NTSC Disc Output

“NTSC” if the screen only has one NTSC-video entrance. If this is not the case, you can choose to leave “PAL60” as is.

DVD Out

RGB : Sends RGB signal from the AV JACK (SCART terminal).

S-Video : Sends S-VIDEO signal from the AV JACK (S-Video terminal).

Video : Sends COMPOSITE VIDEO signal from the AV JACK (SCART terminal).

ENG-31