Using the Battery

Installing the Battery

1.Insert the battery into the opening on the back of the phone at a 45-degree angle, making sure to line up the gold contacts. Gently press down until the battery snaps into place.

2.Install the protective cover by lining up the tabs at a 45-degree angle, and gently press down until the cover snaps into place.

Removing the Battery

Warning! Do not handle a damaged or leaking Li-Ion battery as you can be burned.

1.Make sure the power is off so that you don’t lose any stored numbers or messages. Remove the protective cover by pressing the release latch and pulling up on the back of the cover.

2.Use your thumbnail to lift and then remove the battery as indicated in the diagram.

8

Page 16
Image 16
Sanyo Cell Phone manual Using the Battery, Installing the Battery, Removing the Battery