Operation with the Remote Control Unit (continued)
2. Manual Operation
SET TEMP.
NOTE
1HR. | ON |
|
TIMER | OFF | TEMP. |
STEP 2 | STEP 3 |
| |
STEP 4 |
|
FLAP FAN SPEED MODE | |
STEP 5 | STEP 1 |
ON | OFF |
| NIGHT |
SET | CANCEL SETBACK |
Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit do not meet your needs, press the setting buttons as described below and change the settings as desired.
| STEP 1 | Press the MODE selector button and select the | |||
|
|
| desired mode. | → |
|
|
|
| For heating operation |
| |
|
|
| For dehumidifying operation → |
| |
|
|
| For cooling operation | → |
|
|
|
|
| ||
| STEP 2 | To start the air conditioner, press the ON/OFF | |||
|
|
| operation button. |
|
|
|
|
|
| ||
| STEP 3 | Press the TEMP. setting buttons to change the | |||
|
|
| temperature setting to the desired temperature. |
| |
|
|
| Adjustable temperature range: |
| |
|
|
| 88 °F max. 60 °F min. |
|
|
|
|
|
| ||
| STEP 4 | Set the FAN SPEED selector button to the setting you | |||
|
|
| want. |
|
|
|
| If the fan speed is set to | (Automatic), the | fan | |
| NOTE |
| |||
|
|
| speed switches automatically, according to the | ||
|
|
| |||
|
|
| difference between the actual room temperature and | ||
|
|
| the temperature setting. |
|
|
|
|
|
| ||
| STEP 5 | Press the FLAP button and set the airflow direction as | |||
|
|
| desired. |
|
|
|
|
| (Refer to “Adjusting the | Airflow Direction” | on |
|
|
| page 21.) |
|
|
|
|
|
|
|
|
To stop the air conditioner, press the ON/OFF operation button again.
14 |
