Pre-operation preparation

Screen display

After turning on the power, the message "INITIALIZING" is displayed. Next, the live videos are displayed on a quad-screen. The screen display necessary to operations is displayed on the screen.

• The screen display can be hidden except for the recording screen display. (P25)

b Quad-screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

b Single-screen

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

3

 

 

 

4

 

 

 

5

 

 

12

3

 

 

 

4

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2%

 

 

2006/07/14

09:04:54

 

 

 

 

 

 

 

 

 

 

 

 

2%

 

 

2006/07/14

09:04:54

 

CH1

C

CH2

CH3

CH4

CH1 C

67

1 Operation display

: Displayed during live video sequencing.

: Displayed during alarm output.

: Displayed during remote operation by PC.

2Remote control display (P32)

:This icon shows that remote operations are possible. Depending on the remote ID number settings, this icon may not be displayed and remote operations may not be available.

3Alarm input display

:

Blinks during motion or sensor alarm input. The mark is one channel from the left.

4Hard disk used capacity display

Displays the amount of recording on the hard disk from 0-99%. When the disk is full, "99%" changes to "FULL".

When the recording settings are set to overwrite and the

hard disk is full, 99% changes to which represents overwriting mode.

6 7

5Date and time display

This unit manages the recorded videos according to their date and time. Make sure the correct date and time are set in the menu setting. (P7)

6Camera channel display CH1/CH2/CH3/CH4

7Recording display

Factory default settings start continuous recordings (C) automatically once the power is turned on. Change the recording mode using the menu settings. (P27)

C: Recording in the continuous mode (CONTINUOUS)

R:Recording in the real time mode (When pressing the REC/STOP button)

M:Recording in the motion detection mode (BY EXT.

MOTION)

S:Recording in the sensor detection mode (BY SENSOR)

•If a live video is disconnected, the message "VIDEO LOSS" is displayed on the monitor.

•If a video signal is not connected to the video input terminal, the message "NO VIDEO" is displayed on the monitor.

6