Connecting to this unit
To start this software, 
), the main screen is displayed. When connecting a camera to this unit following the procedure below, the camera live video is displayed.
bConnecting for the first time
1Click the connect button on the operation panel.
The connection dialog [Connect] is displayed.
2Input information such as the address information and settings required for the connection.
•Site Name:
Set up an administrative designation for this unit. If no designation is input it is substituted by the IP address.
•IP Address/Port No.:
Input the IP address and PORT number set on the NETWORK screen of this unit.
•Protocol:
Select the protocol (TCP/UDP).
•Password:
Input the network password set on the SYSTEM screen of this unit.
This unit cannot be connected to the network if the [CLIENT ACCESS] on the NETWORK screen is not set to "ON". (P33)
3Click [OK] on the dialog [Connect].
The camera connects to this unit and the live video of the camera is displayed on the main screen.
bDisconnecting
Once connected, the connect button on the operation panel changes to the disconnect button.
Clicking this button disconnects the connection with this unit and the displayed video disappears.
bWhen there are several connections
This unit can retain and display, in the dialog [Connect], the connection information for up to a maximum of 16 connections.
Select 1 unit in the pull down menu of the [Site Name] of the dialog and click [OK] to connect.
Memo: To change the connection destination, disconnect the present connection and perform the connection operations once again.
41