Main screen structure and function of each part

When connected to this unit, the live video of the camera is displayed on the main screen.

1

2

3

1

4

3

2

3

2

1

1Video display area

Displays live video or playback video.

<Screen display method>

Can be switched using the operation button on the screen. (P43)

•Single-screen

•Quad-screen

•Sequence (camera switch) display

•Full-screen display

<Camera information>

The following camera information is displayed on each camera video.

1(Top left):

•Camera channel (CH 1-4)

•Camera designation

Set in the camera designation settings (site) screen in the set up menu. (P51)

(When no camera is connected to the channel, the message "No Camera" is displayed.)

2(Top right):

M: BY MOTION recording in progress (P13)

S:BY EXT. SENSOR recording in progress (P14)

3(Bottom right):

R:Recording, such as real time recording, in progress. (P12)

4(Bottom left):

A: Alarm output in progress (P43)

4(The example shown is a quad-screen display.)

2Information display area

The following information is displayed.

1Shows the used capacity of the hard disk of this unit

2Communication bit rate and frame rate

To display, set in the set up menu in the general setting screen. (P50)

3Date and time information

For live video: Current date and time

For playback video: Recorded date and time

3Operation panel (P43)

The view operation buttons are arranged on the panel.

4Log window

The operation history is displayed as a list.

Displayed items: Type, Site, Event, Date/Time

Memo: Click [SEARCH] on the operation panel to switch the screen to search mode. One part of the operation panel display and one part of the log window display change. (P47)

42