
Setup menu settings
DEvent log search, view, save (Log View)
Event information can be searched and events can be saved to a PC.
14
2
3
5
1Specify the folder to be searched using [Path].
2Set the start point of the search range in [From].
If the checkbox [First] is checked, it is automatically set to the first date and time in the folder.
3Set the end point of the search range in [To].
If the checkbox [Last] is checked, it is automatically set to the newest date and time in the folder.
4Click [Find].
The event information of the specified range is displayed as a list in the log list.
5To save the displayed log list as text, click [Save]. To change the destination folder displayed in [Path], click [Browse] and select a new destination folder.
Once the above operations are complete, click [OK] and close the screen.
ERecord settings (Record)
Sets the recording conditions while in network operations. Recorded video is saved on the hard disk of the PC.
1
2
3
1Record Condition <Recording mode>
Select a recording mode using the radio button.
•Always:
Recording is performed when the recording button on the operation panel is set to ON
•Event:
When the recording button on the operation panel is set to ON, recording is on standby and recording is performed when specified events occur.
<Automatic recording settings (Auto Record)>
If the checkbox is checked, the recording button on the operation panel is always fixed to ON and video is automatically recorded in the selected recording mode when the unit is connected to the network.
[Auto Record] settings become valid as soon as the unit has been disconnected and reconnected.
2Event
If [Record Condition] is set to "Event", set the following conditions.
<Event types>
•Motion:
When this unit performs a BY MOTION recording the event is also recorded on the PC.
•Alarm:
When an alarm signal is input into the external sensor terminal situated on the back panel of this unit, the event is recorded on the PC.
<Recording duration>
• Duration (Unit: seconds)
3Channel
Specify the camera to be recorded using the checkbox.
Memo: Using [All] of the checkbox, the user can check or uncheck all the cameras.
Click [OK] once the above settings are complete. The content of the settings are confirmed and saved.
52