SYSTEM settings
DSetting an ADMIN PASSWORD
To set a password to enter the menu settings screen of this unit. The initial value is "1111".
1Select ADMIN PASSWORD using the control button ({) and press the ENTER button.
The Current password input screen is displayed.
2Input the current password (1111) using the camera selection button (1) and press the ENTER button.
The New password input screen is displayed.
ADMIN PASSWORD
Current: * * * *
- - - -
bSettings for no password
It is possible to enter the menu settings screen without inputting a password.
1Select ADMIN PASSWORD using the control button ({) and press the ENTER button.
The Current password input screen is displayed.
2Enter the current password using the camera selection button (1/2/3/4) and press the ENTER button.
The New password input screen is displayed.
ADMIN PASSWORD
Current: * * * *
- - - -
If the password is input incorrectly the following message is displayed, input the password correctly once again.
"INVALID CURRENT PASSWORD"
3Input the new password (Example 2222) using the camera selection button (2) and press the ENTER button.
The Confirm password input screen is displayed.
ADMIN PASSWORD
New: * * * *
- - - -
4To confirm, input the new password once again and press the ENTER button.
The message "PASSWORD CHANGED!!" is displayed so press the ENTER button.
If the password is incorrect the message "INVALID" is displayed. Input the correct password again.
ADMIN PASSWORD
New:
- - - -
3Press the ENTER button without inputting anything.
The Confirm password input screen is displayed.
ADMIN PASSWORD
Confirm:
- - - -
4Press the ENTER button without inputting anything.
The message "PASSWORD CHANGED!!" is displayed so press the ENTER button.
To go to the live screen, press the EXIT/STOP button.
30