Recording
DBY EXT. SENSOR recording
An external sensor can be connected to each channel.
1Connecting an external switch to an external sensor terminal.
Monitor
Camera (Sold separately) (Sold separately)
1 
2 
3 
4 OUT
2Set the following items using the control button ({}~).
• | RESOLUTION | • | FRAME RATE |
• | CHANNEL | • | QUALITY |
3Select RECORDING using the control button ({) and select BY EXT. SENSOR using the control button (}~).
RECORD
RESOLUTION
CHANNEL
bOutput settings at the time of external switch operation
When a motion sensor of this unit or an external sensor is activated, a relay signal is output to the external alarm device connected to the ALARM OUT terminal. It is normally open.
1Connecting an external alarm to the OUT terminal of the external sensor.
Monitor
Camera (Sold separately) (Sold separately)
| 1 | 2 3 | 4 OUT |
Maximum current: |
|
|
|
0.5A/125V AC |
|
|
|
Maximum voltage: | Power |
|
|
1A/30V DC | source |
|
|
2Select ALARM using the control button ({) and select ON using the control button (}~).
3Select ALARM DURATION using the control button ({) and select the alarm signal output duration using the control button (}~).
Selections: 1 - 60 SECONDS
RECORD |
|
|
RESOLUTION | QUAD | |
CHANNEL | CH1 | |
FRAME RATE | 1 f/s | |
QUALITY | NORMAL | |
RECORDING | BY EXT.SENSOR | |
MOTION ZONE | FULL ZONE | |
MOTION SENSITIVITY | 7 |
|
SENSOR TYPE |
| |
PRE RECORD | ON | |
POST EVENT RECORD | 5 SECONDS | |
ALARM | OFF |
|
ALARM DURATION | 5 SECONDS |
|
AUDIO | OFF |
|
TIMER SET |
|
|
4Press the EXIT/STOP button once operations are complete.
Press the EXIT/STOP button repeatedly to return to the live screen.
14