Sanyo DSR-2004 Operations using the Network

This unit can be operated from a PC screen by using the supplied network operation software "Sanyo DVR Utility 2004".

Prior to performing network operations make the following preparations.

Connection and settings

•Network connection:

Connect this unit and the PC using a LAN or Internet connection. (P5)

•Network settings:

Set the network connection settings on the NETWORK screen of this unit. (P33)

Operating environment

•CPU: Intel Pentium4 1.2 GHz or higher

•Memory: Minimum 256 MB

(512 MB or higher recommended)

•VGA: 16 MB (64 MB recommended)

•Resolution: 1024 × 768

•Disk capacity: 10 MB

•Operating System:

Windows 2000 Professional SP4/

XP Professional SP2/XP Home

Direct X: Direct X 8.1 or above

Installing "Sanyo DVR Utility 2004"

Install using the interactive screen.

1Insert the supplied CD-ROM in the CD drive and double-click "Sanyo Client.exe".

The installer runs.

2Confirm the installation destination folder on the "Choose Destination Location" screen and click [Next].

To change the installation destination folder, click [Browse] and select a folder.