RECORD settings

Press the MENU button and enter the password. (P24)

The MAIN MENU is displayed, select "RECORD" using the control button ({}~).

MAIN MENU

LIVE

RECORD

SYSTEM

NETWORK

HDD SET

SERVICE

RECORD

 

 

 

RESOLUTION

QUAD

CHANNEL

CH1

FRAME RATE

1 f/s

QUALITY

NORMAL

RECORDING

CONTINUOUS

MOTION ZONE

FULL ZONE

MOTION SENSITIVITY

7

SENSOR TYPE

---

PRE RECORD

ON

POST EVENT RECORD

5 SECONDS

ALARM

OFF

ALARM DURATION

5 SECONDS

AUDIO

OFF

TIMER SET

 

ASetting the RESOLUTION

To set the resolution for the recordings.

Select RESOLUTION using the control button ({) and select a setting using the control button (}~).

FULL: When recording single-screen

 

•

NTSC: 720 × 480

•

PAL: 720

× 576

QUAD: When recording quad-screen

 

•

NTSC: 360 × 240

•

PAL: 360

× 288

BSetting a CHANNEL

To set the recording settings of each channel.

Select an item for each setting using the control button ({) and select a setting value using the control button

(}~).

●Setting a CHANNEL

Select CHANNEL and select a channel.

CH1/CH2/CH3/CH4

●Setting the FRAME RATE (Unit: FPS)

Select FRAME RATE and select a value.

NTSC: OFF/1/2/ ... 29/30 (f/s)

PAL: OFF/1/2/ ... 24/25 (f/s)

The FRAME RATE setting represents the total frame rate of each channel. For example, if the frame rate is set to 25 (30) for channel 1 it cannot be set differently for other channels.

If FULL is selected under resolution setting:

NTSC: It is possible to select up to a total of 30 frames for all channels

PAL: It is possible to select up to a total of 25 frames for all channels

If QUAD is selected under resolution setting:

NTSC: It is possible to select up to a total of 120 frames for all channels

PAL: It is possible to select up to a total of 100 frames for all channels

●Setting the QUALITY

To select QUALITY and select the video quality.

Selections: NORMAL/FINE/BASIC

●Setting the RECORDING

To select RECORDING and select the recording mode.

CONTINUOUS (P13)

Recording is performed while this unit is turned on.

BY MOTION recording (P13)

Recording is performed as soon as the internal motion sensor of this unit reacts.

BY EXT. SENSOR (P14)

Recording is performed as soon as a sensor device connected to the external sensor (SENSOR) terminal device of this unit reacts.

BY SCHEDULE (P15)

Recording is performed daily during the set time slot set on the SCHEDULE screen in the recording settings.

27