Basic Operation

Operating with Projector Control

Light Function

 

Side Control

Light function is used

to turn on the lights on the side

control and around terminals. To turn off the lights, press

 

 

 

 

 

 

 

 

 

 

 

SHUTTER button

 

 

 

 

 

 

 

 

 

 

 

the Light button again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LIGHT button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZOOM button

• The buttons on the side control except for the LIGHT button

 

 

 

 

 

 

 

 

 

 

 

 

FOCUS button

and ON/STAND-BY button do not light up when the projector

 

 

 

 

 

 

 

 

 

 

LENS SHIFT button

 

 

 

 

 

 

 

 

 

 

is in stand-by mode or during the cooling down period.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto PC Adjustment

Operates the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 36 for details.

Zoom Adjustment

Press the ZOOM button and “Zoom” will be displayed on the screen. And then press the Point ed buttons to zoom in and out the image.

Focus Adjustment

Press the FOCUS button and “Focus” will be displayed on the screen. And then press the Point ed buttons to adjust the focus of the image.

Lens Shift Adjustment

Press the LENS SHIFT button and “Lens shift” will be displayed on the screen. Use the Pointed ed7 8 buttons to position the projection image to the desired point without having picture distortion.

Press and hold the LENS SHIFT button for more than 5 seconds to return the lens to the central position. See page 18 for details.

SELECT button

POINT buttons

INFORMATION button

AUTO PC ADJ. buttons

Shutter Function

Shutter function allows you to completely block out light to the screen. Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to p.65 for detail of setting for the Shutter function.

Note:

The arrow disappears at the maximum lens shift in each direction.

The arrows turn red when the lens shift comes to the center position of the screen.

Information

Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector.

Press the INFORMATION button to toggle between the current and next Information menus and the cancellation of menu display.

The Information menu can also be selected from the menu.

Note:

The SHUTTER button on the side control and the remote control cannot be effective when Shutter Protection is On in the Setting menu. (p.65)

The SHUTTER indicator on the projector's top lights blue when the shutter is closed. (pp.13, 85)

The projector will shut down automatically when the set time on shutter management has passed. (p.65)

The Power management function does not work when the shutter is closed. (p.62)

28

Page 28
Image 28
Sanyo HF10000L owner manual Basic Operation Operating with Projector Control, Information