Settings
Filter control
You can replace the filter with this function. Press the SELECT button at Filter control to display a confirmation box. To replace, press the SELECT button at Yes and the electrically operated filter starts to scroll.
✔Note
•Filter replacement icon and Please wait... message appear on the screen when the filter is being scrolled.
•The filter cannot be rewound.
•When the filter is replaced, the total accumulated time of the filter use is automatically set to 0.
Fan control
Choose the running speed of cooling fans from the following options.
Normal | Operates in this mode under normal conditions. |
Max | Use this mode when you want to increase the |
| cooling effect when operating the projector in |
| high ambient temperature environment. Fan |
| noise is louder than Normal. |
Remote control
The eight different remote control codes (Code
The same code should be set on both the projector and the remote control. For example, operating the projector in Code 7, the remote control code also must be switched to Code 7.
To change the code for the projector:
Select a remote control code in this Setting Menu.
To change the code for the remote control:
Press and hold the MENU button and a number button
✔Note
•When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector.
•If the batteries are removed from the remote control for a long period of time, the remote control code will be reset.
RC sensor
Select a location of the infrared remote receiver of the remote control. See “Remote Control Receivers and Operating Range” on page 15 for details.
Both | Activates both the front and back receiver. |
Front | Activates only the front receiver. |
Back | Activates only the back receiver. |
A confirmation box appears and then select Yes.
61
