Computer Input

Image Adjustment

1

Press the MENU button to display the On-Screen

 

Menu. Use the Point ed buttons to select Image

 

adjust and then press the Point 8 or the SELECT

 

button.

2

Use the Point ed buttons to select the desired item

 

and then press the SELECT button to display the

adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.

Contrast

Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).

Image Adjust Menu

Selected Image mode

Color management

The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required.

You can store up to eight (8) color management data.

1

Select and highlight Color Management by using the Point

ed buttons and press the SELECT button. The projected

 

image freezes, and the COLOR MANAGEMENT POINTER

 

appears.

2

Use the Point ed7 8 buttons to move the pointer to the

 

spot where you want to adjust the color and then press the

 

SELECT button. The COLOR SELECTION window appears,

 

and the color in the center of the pointer is selected and you

 

can adjust the color.

3

Use the Point ed7 8 buttons to adjust the LEVEL and

 

PHASE of the color, and then press the SELECT button to

 

confirm the setting. Then use the Point ed buttons to adjust

 

the GAMMA for the color and press the SELECT button to

 

accept the setting. After adjusting, press the SELECT button

 

to go to the COLOR MANAGEMENT LIST.

 

COLOR SELECTION MODE

 

 

 

 

 

LIST

 

 

 

Go to the

COLOR MANAGEMENT LIST.

 

COLOR M.

 

 

Return to the

COLOR MANAGEMENT POINTER. (If you press

 

the MENU button on the side control or the remote control ,

 

it returns to the COLOR MANAGEMENT POINTER and you

 

will need to reselect and readjust the color.)

Use the Point 7 8 buttons to adjust the setting value.

Note

When White balance Red, Green or Blue is adjusted, Color temp. will change to Adj.

POINTER MODE

COLOR MANAGEMENT

POINTER

Select and highlight Color Management by using the Point buttons and press the SELECT button.

40

Page 40
Image 40
Sanyo HF10000L owner manual Computer Input Image Adjustment, Contrast, Brightness, Image Adjust Menu, Color management