Sanyo HF10000L Input Selection, Direct Operation, Side Control, Remote Control Operation

Input Selection

Direct Operation

Side Control

Side Control

INPUT button

The input source changes each time you press the INPUT button on the side control as follows: Input 1→Input 2→ ...

Before using the INPUT button on the side control or the remote control, you must select a correct input source by On-Screen Menu and the latest input source will be displayed.

Remote Control Operation

Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button on the remote control. The input source appears on the screen as you press each button. Select the connected input source.

INPUT 1 button

Input 1

RGB (PC analog)

RGB (Scart)

RGB(PC digital)

RGB(AV HDCP)

HDMI

INPUT 2 button

Input 2

RGB

Y,Pb/Cb,Pr/Cr

Video

S-video

Remote Control

INPUT 1/2/3/4

buttons

✔Note:

•“Input 3” and/or “Input 4” are selectable only when interface board(s) are connected to either or both of the slots.

32